Publication Ethics

Publication Ethics and Malpractice Statement

The JOURNAL OF ADVANCED SPORT TECHNOLOGY is committed to publishing and widely disseminating high-quality content. The editorial operations of the JOURNAL OF ADVANCED SPORT TECHNOLOGY must be governed by rigorous ethical standards that are both transparent and fair. We recognize that the scholarly publishing ecosystem is complex and includes editors, authors, reviewers, and publishers. We expect that all involved have a shared understanding and acceptance of the journal’s policies on publication ethics and malpractice. Our policies are closely aligned with COPE’s (Committee on Publication Ethics) Core Practices document, which can be accessed at: COPE Core Practices.

By submitting an article to the JOURNAL OF ADVANCED SPORT TECHNOLOGY, you agree to comply with the following publication ethics and malpractice statement.

 

Copyright and License

The JOURNAL OF ADVANCED SPORT TECHNOLOGY is a fully open-access journal, which means that all articles are available on the Web to all users immediately upon publication. All articles are published under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0). Therefore, the copyright of articles accepted for publication rests with the author(s). Author(s) retain copyright to their work without restrictions. The author(s) has complete control over the work (e.g., retains the right to reuse, distribute, republish, etc.). All content of the Journal is published with open access under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0)., which allows users to:

  • Share — copy and redistribute the material in any medium or format

The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.


Informed Consent

All participants in human subjects’ research have a right to privacy that should not be violated without informed consent. Identifying information, including names, initials, etc., should not be published in written descriptions, photographs, or pedigrees unless the information is essential for scientific purposes and the participants (or parent or guardian) gives written informed consent for publication. Informed consent in this situation requires that an identifiable participant be shown the manuscript and should provide the consent before publication. Authors should disclose to these patients whether any potential identifiable material might be available via the Internet as well as in print after publication. Participants’ consent should be written and archived either with the Journal, the authors, or both, as dictated by local regulations or laws.

 

Plagiarism Policy

The JOURNAL OF ADVANCED SPORT TECHNOLOGY adheres to the Code of Conduct and Best Practice Guidelines set forth by the Committee on Publication Ethics (COPE). We accept all terms and conditions of COPE about plagiarism and in case, any attempt of plagiarism is brought to our attention accompanied by convincing evidence, we act based on flowcharts and workflows determined in COPE.

The Editorial Boards of the JOURNAL OF ADVANCED SPORT TECHNOLOGY take the necessary measures to examine the incoming articles on their originality, reliability of contained information, and correct use of citations. The Editorial Board of the journal acknowledges that plagiarism is unacceptable and therefore establishes the following policies that state-specific actions (penalties) if plagiarism is identified in a manuscript submitted for publication in the journal.

Authors should ensure that they submit only entirely original works. If they have used the work and/or statements of others, this must be appropriately cited or referenced. Plagiarism in any form, including quotations or paraphrasing of substantial parts of another’s article (without attribution), “passing off” another’s article as the author’s own, or claiming results from research conducted by others, constitutes unethical publishing behavior and is unacceptable. Manuscripts that are a compilation of previously published materials of other authors (without their own creative and authoring interpretation) are not accepted for publication. It is unacceptable to use “unfair” text borrowing and assigning research results not belonging to the authors of the submitted manuscript. The authors must ensure that the submitted manuscript:

- describes completely the original work;

- is not plagiarism;

- has not been published before in any language;

- the information used or words from other publications are appropriately indicated by reference or indicated in the text.

Existing copyright laws and conventions must be observed. Materials protected by copyright (for example, tables, figures, or large quotations) should only be reproduced with the permission of their owner. The JOURNAL OF ADVANCED SPORT TECHNOLOGY takes responsibility to assist the scientific community in all aspects of publication ethics policy, particularly in the case of multiple submissions/publications and plagiarism. The editors reserve the right to check the received manuscripts for plagiarism. The manuscript submitted to the journal must have a similarity level of less than 10%. Similarity per each detected reference also must be a maximum of 1%. The textual similarity in the amount of more than 10% is unacceptable.


The Policy of Screening for Plagiarism

All manuscripts must be free from plagiarism contents. All authors are suggested to use plagiarism detection software to do the similarity checking. Editors check the plagiarism detection of manuscripts in this journal by using Grammarly detection software (www.grammarly.com) and using iThenticate. The journal will immediately reject articles leading to plagiarism or self-plagiarism. The journal adheres to international practices of preventing plagiarism. Thus, all authors that submit their manuscripts to the journal must check that their academic work respects the copyrights of other scholars and avoids any plagiarism. Once the manuscript is submitted to the journal, the editorial board will assign a group of anti-plagiarism members to check the manuscript through various tools. If proof of plagiarism is found, the manuscript will be rejected immediately, and the Editorial Board will communicate with the author to demand an explanation and the amendment of the plagiarized content. If the author does not respond within a reasonable length of time or does not make the necessary adjustments, they will not be able to submit manuscripts to the journal for a period of five (5) years. If the Editorial Board has reason to believe that the manuscript was not drafted or researched in an ethical manner, the journal’s implemented code of ethics (Committee on Publication Ethics [Code of Conduct and Best Practices Guidelines for Journals Editors]) will be reviewed and acted accordingly.

 
Definition of Plagiarism:

"Plagiarism is the use of others’ published and unpublished ideas or words (or other intellectual property) without attribution or permission, and presenting them as new and original rather than derived from an existing source. The intent and effect of plagiarism are to mislead the reader as to the contributions of the plagiarizer. This applies whether the ideas or words are taken from abstracts, research grant applications, Institutional Review Board applications, or unpublished or published manuscripts in any publication format (print or electronic). Plagiarism is scientific misconduct and should be addressed as such. Self-plagiarism refers to the practice of an author using portions of their previous writings on the same topic in another of their publications, without specifically citing it formally in quotes. This practice is widespread and sometimes unintentional, as there are only so many ways to say the same thing on many occasions, particularly when writing the Methods section of an article. Although this usually violates the copyright that has been assigned to the publisher, there is no consensus as to whether this is a form of scientific misconduct, or how many of one’s own words one can use before it is truly "plagiarism." Probably, for this reason, self-plagiarism is not regarded in the same light as plagiarism of the ideas and words of other individuals. If journals have developed a policy on this matter, it should be clearly stated for authors." (WAME, 2020). Direct plagiarism is the plagiarism of the text. Mosaic plagiarism is the borrowing of ideas and opinions from a source and a few verbatim words or phrases without crediting the author. Plagiarism is committed when one author uses another work (typically the work of another author) without permission, credit, or acknowledgment. Plagiarism takes different forms, from literal copying to paraphrasing the work of another.

Authors can adhere to the following steps to report plagiarism:

  • Inform the editor of the journal where a plagiarized article is published.
  • Send original and plagiarized articles with plagiarized parts highlighted.
  • If evidence of plagiarism is convincing, the editor should arrange for a disciplinary meeting.
  • The editor of the journal where the plagiarized article should communicate with the editor of the journal containing the original article to rectify the matter.
  • The plagiarist should be asked to explain.
  • In case of nonresponse in the stipulated time or an unsatisfactory explanation, the article should be permanently retracted.
  • The author should be blacklisted and debarred for submitting an article to a particular journal for at least 5 years.
  • The concerned head of the institution has to be notified.

The author bears the responsibility for checking whether the material submitted is subject to copyright or ownership rights, e.g., figures, tables, photographs, illustrations, trade literature, and data. The author will need to obtain permission to reproduce any such items and include these permissions with their final submission. Where use is so restricted, the editorial office and Publisher must be informed of the final submission of the material. Please add any necessary acknowledgments to the typescript, preferably in the form of an Acknowledgments section at the end of the article. Credit the source and copyright of photographs, figures, illustrations, etc. in the supplementary captions.

Plagiarism is an act intentionally or unintentionally in obtaining or trying to obtain credit or value for scientific work, by quoting part or all of the work and/or scientific work of other parties that are recognized as scientific works, without expressing the source appropriately and adequately. Therefore, manuscripts must be original, never published, and not in the process of waiting for publication elsewhere. Material taken verbally from other sources needs to be clearly identified so that it is different from the original text. If plagiarism is identified, the Editor-in-Chief is responsible for reviewing the manuscript and will approve the action according to the level of plagiarism detected, with the following guidelines.


Plagiarism Level

  1. Tracing a portion of a short sentence from another article without mentioning the source.
    Action: Authors are given warnings and requests to change the text and quote correctly.
    2. Tracing most of the other articles without the right quote and not mentioning the source.
    Actions: The submitted manuscript is rejected for publication in the JOURNAL OF ADVANCED SPORT TECHNOLOGY and the Author can be sanctioned for not being allowed to publish in the journal.
  2. All manuscript writers are responsible for the content of manuscripts they submit to the journal. If the manuscript is classified as plagiarism, then all authors will be subject to the same action.
  3. If the author is proven to submit the manuscript to the journal by simultaneously sending it to another journal, and this overlap is found during the reviewer process or after publication, then the action according to point 2 above is given.
  4. If plagiarism is found outside the rules above, the editor of the journal has the right to give sanctions according to the editor’s team policy.
  5. In the case of multiple borrowing Editorial Board acts according to the rules of COPE.

 There are several indicators of plagiarism that all authors must be aware of:

  • The most easily identifiable plagiarism is that of repeated content when an author copies another author’s work by reciting words, sentences, or paragraphs without citing sources. This plagiarism model can be easily identified by our plagiarism checker software.
  • The second type of plagiarism occurs when an author reproduces a substantial part of another writer’s work, without citing him/her. The term "reproducing substance" here can be understood as copying another’s ideas, both in terms of quantity and quality, which potentially eliminates the original author’s rights, in the context of intellectual property.
  • The third type of plagiarism is when an author takes ideas, words, or phrases in paraphrased sentences or paragraphs, without citing the source. This type of plagiarism often cannot be checked through plagiarism software, as it is idea-based. Yet, this practice becomes unethical when the author does not cite, nor acknowledge the source from the original writer.


Responding to Allegations of Possible Misconduct

Definitions of Misconduct

Deception may be deliberate, by reckless disregard of possible consequences, or by ignorance. Since the underlying goal of misconduct is to deliberately deceive others as to the truth, the journal’s preliminary investigation of potential misconduct must take into account not only the particular act or omission but also the apparent intention (as best it can be determined) of the person involved. Misconduct does not include unintentional errors. The most common forms of scientific misconduct include:

  • Falsification of data: ranges from fabrication to deceptive selective reporting of findings and omission of conflicting data, or willful suppression and/or distortion of data.
  • Plagiarism: The appropriation of the language, ideas, or thoughts of another without crediting their true source, and representation of them as one’s original work (see prior section).
  • Improprieties of authorship: Improper assignment of credit, such as excluding others, misrepresentation of the same material as original in more than one publication, the inclusion of individuals as authors who have not contributed to the work published; or submission of multi-authored publications without the concurrence of all authors.
  • Misappropriation of the ideas of others: an important aspect of scholarly activity is the exchange of ideas among colleagues. Scholars can acquire novel ideas from others during the process of reviewing grant applications and manuscripts. However, improper use of such information can constitute fraud. Wholesale appropriation of such material constitutes misconduct.
  • Violation of generally accepted research practices: Serious deviation from accepted practices in proposing or carrying out research, improper manipulation of experiments to obtain biased results, deceptive statistical or analytical manipulations, or improper reporting of results.
  • Material failure to comply with legislative and regulatory requirements affecting research: Including but not limited to serious or substantial, repeated, willful violations of applicable local regulations and law involving the use of funds, care of animals, human subjects, investigational drugs, recombinant products, new devices, or radioactive, biologic, or chemical materials.
  • Inappropriate behavior in relation to misconduct: this includes unfounded or knowingly false accusations of misconduct, failure to report known or suspected misconduct, withholding or destruction of information relevant to a claim of misconduct, and retaliation against persons involved in the allegation or investigation. This includes qualifications, experience, or research accomplishments to advance the research program, to obtain external funding, or for other professional advancements.


Responses to Possible Misconduct

A committee consisting of the editor-in-chief and editorial board members, as determined by the editor-in-chief, who has specific expertise in the area being investigated, will investigate misconduct allegations. The suitable actions were taken based on the recommendations of the Committee on Publication Ethics (COPE).

The JOURNAL OF ADVANCED SPORT TECHNOLOGY follows the policies and guidelines of the Committee on Publication Ethics (COPE) and abides by its Code of Conduct in dealing with potential cases of misconduct.

 

Allegations of misconduct

Dealing with possible misconduct

 

  • Editors should follow the COPE flowcharts where applicable.
  • Editors have a duty to act if they suspect misconduct or if an allegation of misconduct is brought to them. This duty extends to both published and unpublished papers.
  • Editors should not simply reject papers that raise concerns about possible misconduct. They are ethically obliged to pursue alleged cases.
  • Editors should first seek a response from those suspected of misconduct. If they are not satisfied with the response, they should ask the relevant employers, or institution, or some appropriate body (perhaps a regulatory body or national research integrity organization) to investigate.
  • Editors should make all reasonable efforts to ensure that a proper investigation into alleged misconduct is conducted; if this does not happen, editors should make all reasonable attempts to persist in obtaining a resolution to the problem. This is an onerous but important duty.

 


Open Access Policy

The JOURNAL OF ADVANCED SPORT TECHNOLOGY provides immediate open access to its content. Our publisher, the Publisher, abides by the Budapest Open Access Initiative definition of Open Access:

“By “open access” to [peer-reviewed research literature], we mean its free availability on the public Internet, permitting any users to read, download, copy, distribute, print, search, or link to the full texts of these articles, crawl them for indexing, pass them as data to software, or use them for any other lawful purpose, without financial, legal, or technical barriers other than those inseparable from gaining access to the internet itself. The only constraint on reproduction and distribution, and the only role for copyright in this domain, should be to give authors control over the integrity of their work and the right to be properly acknowledged and cited.”

Researchers engage in discovery for the public good, yet because of cost barriers or use restrictions imposed by other publishers, research results are not available to the full community of potential users. It is our mission to support a greater global exchange of knowledge by making the research published in this journal open to the public and reusable under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0). Furthermore, we encourage authors to post their pre-publication manuscripts in institutional repositories or on their websites before and during the submission process and to post the Publisher’s final formatted PDF version after publication. These practices benefit authors with productive exchanges as well as earlier and greater citations of published work. This journal is a fully open-access journal, which means that all articles are available on the Internet to all users immediately upon publication.

Benefits of open access for authors include:

   - Free access for all users worldwide.

   - Increased visibility and readership.

   - No spatial constraints.

   - Rapid publication.

Other benefits of open access for authors:

Fast Publishing: Minimize authors’ long waiting aspect as open-access publishes accepted articles immediately online. All research articles published in this journal journals are immediately freely available to read, download and share.

High Availability: Manuscripts are available on all search engines and indexing databases, especially Google Scholar, Semantic Scholar, Microsoft Academic, etc.

High Publicity: Authors get publicity, acceptance, and recognition in the scientific world.

Maximize the Citation: Authors get frequent citations in others’ articles.

Minimizing the Cost: It allows only one-time payment for the processing of accepted manuscripts and ensures lifetime online availability.

Recognition and Acceptance of Research work: Authors’ researches get full recognition among the intellectual community without any constraints.


Data Sharing Policy

The JOURNAL OF ADVANCED SPORT TECHNOLOGY uses the Basic Data Sharing Policy. The journal is committed to a more open research landscape, facilitating faster and more effective research discovery by enabling reproducibility and verification of data, methodology, and reporting standards. The journal encourages authors to cite and share their research data including, but not limited to: raw data, processed data, software, algorithms, protocols, methods, and materials. Authors are encouraged to share or make open the data supporting the results, or analyses presented in their article where this does not violate the protection of human subjects or other valid privacy or security concerns.

The journal encourages authors to share the data and other artifacts supporting the results in the article by archiving it in an appropriate public repository. Authors should include a Data Accessibility Statement, including a link to the repository they have used so that this statement can be published alongside their article. The journal requires authors of Original Investigations, Case Reports, and Special Paper articles to (1) place the de-identified data associated with the manuscript in a repository; and (2) include a Data Availability Statement in the manuscript describing where and how the data can be accessed.
The journal defines data as the digital materials underlying the results described in the manuscript, including but not limited to spreadsheets, text files, interview recordings or transcripts, images, videos, output from statistical software, and computer code or scripts. Authors are expected to deposit at least the minimum amount of data needed to reproduce the results described in the manuscript.

Data can be placed in any repository that makes data publicly available and provides a unique persistent identifier, including institutional repositories, general repositories (e.g., Figshare, Open Science Framework, Zenodo, Dryad, Harvard Dataverse, OpenICPSR), or discipline-specific repositories. The Data Availability Statement should be placed in the manuscript at the end of the main text before the references. This statement must include (1) an indication of the location of the data; (2) a unique identifier, such as a digital object identifier (DOI), accession number, or persistent uniform resource locator (URL); and (3) any instructions for accessing the data, if applicable. At the point of submission, you will be asked if there is a data set associated with the article. If you reply yes, you will be asked to provide the DOI, pre-registered DOI, hyperlink, or other persistent identifier associated with the data set(s). If you have selected to provide a pre-registered DOI, please be prepared to share the reviewer URL associated with your data deposit, upon request by reviewers. Where one or multiple data sets are associated with a manuscript, these are not formally peer-reviewed as a part of the journal submission process. It is the author’s responsibility to ensure the soundness of the data. Any errors in the data rest solely with the producers of the data set(s). Please note: As you are submitting your manuscript to the journal where submissions are peer-reviewed, the main text file should not include any information that might identify the authors (i.e., Author Name, Address, Conflict of Interest, and fund-related information). As a data availability statement could reveal your identity, we recommend that you remove this from the anonymized version of the manuscript.

Exceptions to this policy will be made in rare cases in which de-identified data cannot be shared due to their proprietary nature or participant privacy concerns. Exceptions to policy and restrictions on data availability are granted for reasons associated with the protection of human privacy, issues such as biosafety, and/or to respect terms of use for data obtained under license from third parties. Confidential data, e.g., human subjects or patient data, should always be anonymized, or permission to share should be obtained in advance. If in doubt, authors should seek counsel from their institution’s ethics committee. Authors should include a data accessibility statement, including a link to the repository they have used so that this statement can be published alongside their article. Below are a few examples:


Data Availability Statement:

  1. Data associated with this article are available in the Open Science Framework at.
  2. The data that support the findings of this study are openly available in [repository name] at http://doi.org/[doi], reference number [reference number].
  3. The data that support the findings of this study are openly available in [repository name] at [URL], reference number [reference number].
  4. The data that support the findings of this study are available in [repository name] at [URL/DOI], reference number [reference number]. These data were derived from the following resources available in the public domain: [list resources and URLs]

 
Benefits of Sharing Data:

There are several benefits to sharing data:

  • Data deposition supports the preservation of data long term.
  • Depositing data in a repository that mints a permanent identifier such as a DOI, allows authors and others to cite the data set, allowing researchers to get appropriate credit for their work.
  • Sharing data can lead to re-use and discovery, with greater opportunities for carrying out meta-analyses and the extraction of new knowledge.
  • Sharing data publicly improves the robustness of the research process, supporting validation, research transparency, reproducibility, and replicability of results. This can, in turn, advance discovery and knowledge.
  • Wider public availability of research data supports the translation of research into practice. 

The JOURNAL OF ADVANCED SPORT TECHNOLOGY offers the following standardized data-sharing policies across our journals:

  • Basic– The journal encourages authors to share and make data open where this does not violate the protection of human subjects or other valid subject privacy concerns. Authors are further encouraged to cite data and provide a data availability statement.
  • Share upon reasonable request – Authors agree to make their data available upon reasonable request. It is up to the author to determine whether a request is reasonable.
  • Publicly available – Authors make their data freely available to the public, under a license of their choice.
  • Open data – Authors must make their data freely available to the public, under a license allowing re-use by any third party for any lawful purpose. Data shall be findable and fully accessible.
  • Open and fully FAIR (Findable, accessible, interoperable, and re-usable) – Authors must make their data freely available to the public, under a license allowing re-use by any third party for any lawful purpose. Additionally, data shall meet the FAIR standards as established in the relevant subject area.


Data Citation

Data should be cited in the same way as article, book, and web citations, and authors are required to include data citations as part of their reference list. Data citation is appropriate for data held within institutional, subject-focused, or more general data repositories. It is not intended to take the place of community standards such as in-line citation of GenBank accession codes. When citing or making claims based on data, authors must refer to the data at the relevant place in the manuscript text and in addition provide a formal citation in the reference list. The journal follows the format proposed by the Joint Declaration of Data Citation Principles:
Authors; Year; Dataset title; Data repository or archive; Version (if any); Persistent identifier (e.g., DOI)”.

 

Appeals and Complaints process